Samsung PS-50P2HT manual Setting the Audio, Setting the Image Lock

Setting the Audio

You can only control Displays for which the Power Status is ON. If you

ENGhave not selected a setup the value displayed will be the Factory Default Value.

➣This function doesn’t operate in TTX mode.

Click “Settings“ of the main icons and the Settings control screen appears.

Info Grid shows some basic information necessary to the Settings control.

When each of unction is selected, the set value of the selected function is displayed on the screen. When Select All is selected, the default value returns. If you change this value in this screen, it switches to CUSTOM in Picture setting mode automatically.

ŒAudio : Control the audio of all input sources.

´Treble : Adjusts the treble of the selected

display.

ˇBass : Adjusts the bass of the selected display.

¨Balance : Adjusts the balance of the selected

display.

Setting the Image Lock

The Setting control function is available for only the displays are powered On.

Click “Settings“ of the main icons and the Settings control screen appears.

Info Grid shows some basic information necessary to the Settings control.

ŒImage Lock : Controls the image lock of PC input source.

´ Frequency : Adjusts the frequency of the selected display.

ˇPhase : Adjusts the phase of the selected display.

¨ Position : Adjusts the position of the selected display.

ˆ Auto Adjustment : Adjusts the picture automatically.

52