Samsung PS-50P2HT manual Inserting the Batteries in the Remote Control, Installation Notes

Inserting the Batteries in the Remote Control

ENG

You must insert or replace the batteries in the remote control when you:

◆ Purchase the PDP

◆Find that the remote control is no longer operating correctly

1Remove the cover on the rear of the remote control by pressing the symbol downwards and then pulling firmly to remove it.

2Insert two R03, UM4, “AAA” 1.5V or equivalent batteries taking care to respect the polarities:

◆ + on the battery against + on the remote control ◆ - on the battery against - on the remote control

3 Replace the cover by aligning it with the base of the remote control and pressing it back into place.

➢Do not mix battery types, i.e. alkaline and manganese.

Installing the Display on the Wall Attachment Panel

➢Wall attachment panel is sold separately. Check with your dealer.

InstallationNotes

◆Do not install the PDP on any place other than vertical walls.

◆To protect the performance of the PDP and prevent troubles, avoid the followings:

-Do not install next to smoke and fire detectors.

-Do not install in an area subjected to vibration or high voltage.

-Do not install in the wall.

-Do not install near or around any heating apparatus.

◆Use only recommended parts and components.

continued...

9