Panasonic WJ-HD309A, WJ-HD316A Recording Mode and Priority, Start recording, Stop recording

RECORDING (Manual Recording)

Do the following to record manually.

Refer to a system administrator about the required settings for manual recording.

							zx
	MONITOR1					STOP	PLAY PAUSE REC - REC STOP
R	MONITOR2						REV	FWD
	1	2	3	4
					PAN/	GOTO
R							SEARCH
	SHIFT		SEQ	OSD	TILT	LAST
						PAN/TILT	SETUP
	5	6	7	8	ZOOM/	A-B SLOW	/ESC
					FOCUS	REPEAT	–	+
	DISK SELECT	COPY	TEXT	MARK
	9	10/0	11	12	IRIS	LISTED
1	EL-ZOOM		LOGOUT	LOGOUT	PRESET
					/AUTO
2	13	14	15	16			SET
						BUSY

zStart recording.

Press the REC button to start recording.

The indicator on the button will light and recording will start. Images from all the connected cameras will be recorded with the default setting.

It is possible to record only images displayed on monitor 2 and the VGA monitor by changing the settings.

When recording with higher priority than manual recording is performed, manual recording will not be performed until this recording finishes.

Refer to the following about the recording mode.

xStop recording.

Press the REC button down for around 2 seconds.

The indicator on the button will go off and recording will stop.

Notes:

•The camera selection button will light orange (currently recording) or blue (currently being recorded and dis- played on the monitor) to indicate which camera is being recorded.

•When recording with other recording modes being per- formed, the indicator on the REC button will not go off even though the REC button is pressed to stop manual recording.

•Manual recording will be stopped for a camera channel when the supply of the video input signals to the cam- era channel is stopped. When the supply of the video input signals to the camera channel is resumed, manual recording will be performed automatically.

●Recording Mode and Priority

There are 4 recording modes as follows.

Recording Mode	Description	Priority*1
Emergency Recording	Start recording manually using an external switch at an emergency event occurrence	Highest
Event Recording	Recording will be performed automatically at an event occurrence	1*2
Manual Recording	Start and stop recording manually	2*2
Schedule Recording	Recording will be performed automatically with a designated start/stop time and date	3*2

*1: Priorities on the above table are the default settings. (Emergency recording is the highest priority.)

*2: Priorities for manual recording, schedule recording and event recording can be changed. Refer to a system administrator about the settings.

20