Panasonic WJ-HD316A, WJ-HD309A operating instructions 151

Note: When the hard disk is replaced or removed, the "TOP MENU" of the "HDD DISK MENU" will be auto- matically displayed.

[Screenshot 1]

The "TOP MENU" of the "HDD DISK MENU" will be dis- played.

Digital Disk Recorder			HDD DISK MENU
WJ-HD300A			TOP MENU
FORMAT		MIRROR ON		MIRROR OFF		REMOVE LINK		RESTART		EXIT
			1	2			3	4
	MAIN	160GB			160GB		-		-
	EXT1	160GB			160GB		160GB		160GB
	EXT2	160GB			160GB		160GB		160GB
	EXT3	160GB			160GB		160GB		160GB
	EXT4	*(160GB)			*(ERROR)		160GB		160GB
	EXT5	ADD (160GB)			ADD (ERROR)		160GB		160GB
	EXT6	160GB			160GB		160GB		160GB
	EXT7	LOST			-		-		-
	Information of recording areas : [SETUP/ESC] OK : [SET]

xMove the cursor to "MIRROR ON" using the arrows but- ton (A B) and press the SET button.

Note: When it is impossible to recover the hard disk (mirror on) such in case that the hard disk size to be recovered is too small, it is impossible to select "MIRROR ON".

[Screenshot 2]

The password entry window will be displayed.

Digital Disk Recorder			HDD DISK MENU
WJ-HD300A			TOP MENU
FORMAT	MIRROR ON			MIRROR OFF		REMOVE LINK		RESTART		EXIT
			1	2		3		4
MAIN		160GB M			160GB M
					Enter the password.
EXT1		160GB			160GB		160GB		160GB
EXT2		160GB							160GB
EXT3		160GB			160GB		160GB		160GB
EXT4		*(160GB)			*(ERROR)		160GB		160GB
EXT5					EXECUTE	CANCEL			160GB
		ADD (160GB) ADD (ERROR) 160GB
EXT6		160GB			160GB		160GB		160GB
EXT7		LOST			-		-		-

Information of recording areas : [SETUP/ESC] OK : [SET]

cEnter the password for an administrator by rotating the jog dial.

The camera selection buttons ([1] - [10/0] for the WJ- HD316A, [1] - [9], [0] for the WJ-HD309A) are available to enter numbers for password.

The same method is used to enter, insert and delete characters as for attaching text information to images. Refer to page 58.

vMove the cursor to "EXECUTE" using the arrows button (C D) and press the SET button.

[Screenshot 3]

The confirmation dialog window will be displayed.

Digital Disk Recorder HDD DISK MENU

WJ-HD300A TOP MENU

FORMAT MIRROR ON MIRROR OFF REMOVE LINK RESTART EXIT

	1	2	3	4
MAIN	160GB M	160GB M
EXT1	160GB	Mirror160GB"ON" in main160GBunit.		160GB
EXT2	160GB	160GB	160GB	160GB
EXT3	160GB	160GB	160GB	160GB
EXT4	*(160GB)	OK	CANCEL	160GB
		*(ERROR)	160GB
EXT5	ADD (160GB)	ADD (ERROR)	160GB	160GB
EXT6	160GB	160GB	160GB	160GB
EXT7	LOST	-	-	-

Information of recording areas : [SETUP/ESC] OK : [SET]

bMove the cursor to "OK" using the arrows button (A B) and press the SET button.

→Recovery of the hard disk will start when the unit is in operation after the "HDD DISK MENU" is closed.

●Remove the Hard Disk Logically and Reconfigure it (REMOVE LINK)

It is possible to remove the hard disk logically (unmount) without uninstalling (detaching) the hard disk physically. It is recommended to remove the hard disk logically when the hard disk of the unit or an extension unit is having trouble (hard disk indicated with "*", "LOST" or "ERROR") and it is necessary to remove it temporarily but not to stop opera- tion.

Do the following to remove the hard disk logically.

zTurn on the power of this unit.

An image saying that the system check has been com- pleted will be displayed.

Press the SET button after the image is displayed.

Note: When the hard disk is replaced or removed, the "TOP MENU" of the "HDD DISK MENU" will be auto- matically displayed.

[Screenshot 1]

The "TOP MENU" of the "HDD DISK MENU" will be dis- played.

Digital Disk Recorder			HDD DISK MENU
WJ-HD300A			TOP MENU
FORMAT		MIRROR ON		MIRROR OFF		REMOVE LINK		RESTART		EXIT
			1	2			3	4
	MAIN	160GB			160GB		-		-
	EXT1	160GB			160GB		160GB		160GB
	EXT2	160GB			160GB		160GB		160GB
	EXT3	160GB			160GB		160GB		160GB
	EXT4	*(160GB)			*(ERROR)		160GB		160GB
	EXT5	ADD (160GB)			ADD (ERROR)		160GB		160GB
	EXT6	160GB			160GB		160GB		160GB
	EXT7	LOST			-		-		-
	Information of recording areas : [SETUP/ESC] OK : [SET]

x Move the cursor to "REMOVE LINK" using the arrows button (A B) and press the SET button.

151