100
[Screenshot 5]
The motion detection area is set with the start point and the
end point as the points at opposite angles of the motion
detection area.
nRepeat steps 4 and 5 to set another motion detection
area.
Up to 4 areas can be set. The newly created areas will
be named automatically as A, B, C and D in the order of
creation.
mTo complete the settings, rotate the jog dial to select
"EXIT" on the status bar, and press the SET button.
[Screenshot 6]
The "VMD Setup" window will be closed and the "VMD
Setup" pop-up menu will be displayed.
,Press the SETUP/ESC button.
→The "VMD Setup" pop-up menu will be closed.
Notes:
•Refer to page 115 for descriptions of how to delete
the motion detection area.
•It is possible to set the sensitivity and the detection
mode (method of detection) of each detection area.
Refer to page 115 for further information.

■[Network]

Perform the settings for the network such as the IP address
and the gateway address when operating this unit a PC via
a network such as a LAN.

8Line Speed

The following are available for "Line Speed".
AUTO: Line speed will be applied automatically.
10-HALF: 10 Mbps half duplex
10-FULL: 10 Mbps full duplex
100-HALF:100 Mbps half duplex
100-FULL: 100 Mbps full duplex
Note: When the SETUP MENU is closed after changing the
line speed, the unit will automatically restart.

8HTTP Port Number

Specify the HTTP port number to be used to transfer
images from this unit. It is not necessary to change it for
normal use.

8DHCP

Select ON or OFF whether or not to use the DHCP server.
When obtaining IP addresses, net mask and a gateway
address from the DHCP server, set to ON.
If not, set to OFF and enter those addresses manually.
ON: Uses the DHCP server.
OFF: Does not use the DHCP server.

8IP Address

Enter an IP address when OFF is selected for "DHCP".
For this unit, enter 4 units from the decimal numbers (0-
254).

8Subnet Mask

Enter a subnet mask according to the network configuration
when OFF is selected for "DHCP".

8Gateway

Enter the gateway address according to the network con-
figuration when OFF is selected for "DHCP".
SETUP MENU
LIVE
Quick
Display
REC & Event
Network
Advanced Menu
■ Line Speed
■ HTTP Port Number
■ DHCP
■ IP Address
■ Subnet Mask
■ Gateway
AUTO
00080
OFF
192168 000 250
255255 255 000
192168 000 001
SETUP MENU
LIVE
Quick
Display
REC & Event
Network
Advanced Menu
■ REC Type
■ REC Camera
■ Resolution
■ Manual REC
REC Rate
Quality
■ Event REC
REC Rate
Quality
Time
Operation Mode
■ Event Setup
■ Power ON Manual REC
■ VMD Setup
QUICK
SETUP
FIELD
30ips / 16CH
FQB
30ips / 16CH
FQB
30s
ALARM
SETUP
OFF
SETUP
VMD Setup
CAM1
CAM2
CAM3
CAM4
CAM5
CAM6
CAM7
CAM8
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
CAM9
CAM10
CAM11
CAM12
CAM13
CAM14
CAM15
CAM16
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF