Panasonic WJ-HD309A, WJ-HD316A operating instructions 114, Event Function for Events

■[Event] Function for Events

Perform the settings for event actions of each event type (motion detection, video loss, command alarm and terminal alarm).

SETUP MENU	System	Recording	Event	Schedule		LIVE
Advanced
	Switcher	Display	Comm	Maintenance
	■ VMD
Event Setup					SETUP
	■ Video Loss
VMD Setup					SETUP
	■ Terminal/Command Alarm
Alarm Setup					SETUP

Terminal Setup

Quick Menu

●[Event Setup] Settings for the alarm output duration and the buzzer duration

Perform the settings for the alarm output duration and the buzzer sound duration for each event type (motion detec- tion, video loss, terminal/command alarm).

SETUP MENU
	System	Recording			Schedule		LIVE
Advanced
	Switcher	Display	Comm		Maintenance
	■ VMD
Event Setup						SETUP
	■ Video Loss
VMD Setup						SETUP
	■ Terminal/Command Alarm
Alarm Setup						SETUP
Terminal Setup
Quick Menu
SETUP MENU
	System	Recording			Schedule
Advanced							LIVE
	Switcher	Display	Comm		Maintenance
	■ VMD
Event Setup						SETUP
	■ Video Loss Setup
VMD Setup						SETUP
	■ Terminal/Command Alarm Setup					SETUP
Alarm Setup
	■ Alarm Output			1 0 s
Terminal Setup	■ Buzzer			1 0 s
		O K	CANCEL
Quick Menu

The following are available for the alarm output duration. When OFF is selected, the alarm output will not be sup- plied.

(s: second, m: minute)

OFF: No alarm output is supplied.

1 s - 30 s (in 1 second intervals)/40 s/50 s/1 min/2 min/ 3 min/4 min/5 min

EXT: Alarm output will continue until the ALARM RESET button is pressed.

Important:

The alarm output duration cannot be set for video loss. Signals will be supplied continuously from the camera error output terminal (pin no. 17) of the ALARM/CON- TROL connector on the rear panel during the period when the video signal is lost. (Refer to page 86.)

The following are available for the buzzer sound duration. When OFF is selected, a buzzer will not sound.

(s: second, m: minute)

OFF: The buzzer will not sound.

1 s - 30 s (in 1 second intervals)

/40 s/50 s/1 min/2 min/3 min/4 min/5 min

EXT: The buzzer will continue until the ALARM RESET but- ton is pressed.

●[VMD Setup] Perform the settings for the motion detection function

Select ON or OFF to determine whether to enable or dis- able the motion detection function for each camera chan- nel.

When ON is selected, perform the settings for the motion detection area for each camera channel. Up to 4 areas can be set for a camera channel for the detection area. Refer to page 114 for further information about the motion detection function.

SETUP MENU	System	Recording	Event	Schedule		LIVE
Advanced	Switcher	Display	Comm	Maintenance
	■ CAM1
Event Setup					ON
	■ CAM2				OFF
VMD Setup
	■ CAM3				OFF
Alarm Setup	■ CAM4
					OFF
	■ CAM5				OFF
Terminal Setup
	■ CAM6				OFF
	■ CAM7				OFF
	■ CAM8				OFF
	■ CAM9				OFF
	■ CAM10				OFF
	■ CAM11				OFF
	■ CAM12				OFF
	■ CAM13				OFF
	■ CAM14				OFF
	■ CAM15				OFF
Quick Menu
	■ CAM16

[Screenshot 1]

Start operation from the camera channel selection menu of the "VMD Setup" window.

SETUP MENU
	System	Recording		Schedule		LIVE
Advanced
	Switcher	Display	Comm	Maintenance
	■ CAM1
Event Setup					ON
	■ CAM2				OFF
VMD Setup
	■ CAM3				OFF
Alarm Setup	■ CAM4				OFF
	■ CAM5				OFF
Terminal Setup
	■ CAM6				OFF
	■ CAM7				OFF
	■ CAM8				OFF
	■ CAM9				OFF
	■ CAM10				OFF
	■ CAM11				OFF
	■ CAM12				OFF
	■ CAM13				OFF
	■ CAM14				OFF
Quick Menu	■ CAM15				OFF
	■ CAM16

z Rotate the jog dial to select ON for a desired camera channel for which the motion detection function is to be applied, and press the SET button.

114