Panasonic WJ-HD309A 120, Event Program Create event programs for an event occurrence, Rate

MAN. (MANUAL): The recording duration will be as follows depending on the event type.

•At a motion detection: For 8 seconds

•At a video loss occurrence: During a video loss occur- rence

•At a terminal alarm occurrence: During the supply of a signal

•At a command alarm: For 8 seconds

CON. (CONTINUE): Recording will be performed continu- ously until the ALARM RESET button is pressed.

Notes:

•When "MAN." is selected for the recording duration, recording will be performed for 8 seconds at least at an event occurrence as long as the alarm is not canceled.

•Available recording duration for pre-event recording will differ depending on the settings of "Resolution" and "Recording Rate and Quality" for pre-event recording as below:

Recording	FRAME 3D ON	FIELD	SIF
rate	FRAME 3D OFF
0.1	5 min	10 min	20 min
0.2	2 min	5 min	10 min
0.3	1 min	3 min	6 min
0.4	1 min	2 min	5 min
0.5	1 min	2 min	4 min
1	30 s	1 min	2 min
2	10 s	30 s	1 min
3	10 s	20 s	30 s
5	7 s	10 s	20 s
6	6 s	10 s	20 s
7.5	4 s	9 s	10 s
10	3 s	7 s	10 s
15	2 s	4 s	9 s
30	1 s	2 s	4 s
60	-	1 s	-

•When a pre-recording area is created in an optional extension unit (WJ-HDE300 series), it is possible to per- form pre-event recording for up to 60 minutes accord- ing to the resolution, recording rate and disk space for pre-event recording. Refer to page 147 for descriptions of how to create the pre-recording area.

•Pre-event recording for the camera channel that has the pre-recording area in the extension unit will always be performed on the pre-recording area.

•When a value that is impossible to be applied is set for the pre-event recording, the relevant value will turn red, and it will be impossible to close the recording program window. In this case, lower the recording rate that has turned red.

Recording Program 1
■ Resolution					FIELD
■ Recording Table								60 ips
■ Total REC Rate								48 ips
	MANUAL		SCHEDULE		PRE EVENT			POST EVENT
	RATE	QUALITY	RATE	QUALITY	RATE	QUALITY	TIME	RATE	QUALITY	TIME
CAM1	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM2	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM3	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM4	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM5	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM6	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM7	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM8	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM9	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM10	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM11	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM12	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM13	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM14	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM15	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
CAM16	3ips	FQB	OFF	FQB	OFF	FQB	10s	1ips	FQB	30s
							O K		CANCEL

•When the recording rate is low, images may be record- ed for a longer duration than the set pre-event record- ing duration.

•Pre-event recording will not be performed for a camera channel whose post-event recording rate is OFF.

•Audio will be recorded up to for 16 seconds before the event occurrence. However, audio will not be recorded during pre-event recording that is being performed in the HDD pre-recording area.

•In case that the pre-event recording is to be performed, when two or more events occur continuously in a moment, the start time of the post-event recording of the second event and later will be delayed respectively. (The actual time and date of the event occurrences will be recorded on the event log.) In this case, the start time of the pre-event recording will be delayed auto- matically.

When performing the pre-event recording in an environ- ment where two or more events may occur at short times frequently, it is recommended to set the pre- recording duration longer.

Important:

Pre-event recording image only just recorded will be delet- ed in the following cases:

•When the SETUP MENU is closed after changing the settings

•When post-event recording is newly performed

•When the time zone of a schedule switched and record- ing had just started

•When the date has been changed

●[Event Program] Create event programs for an event occurrence

Perform the settings of event action for each event type (motion detection, video loss, terminal/command alarm) or of auto copy.

SETUP MENU	System	Recording	Event	Schedule		LIVE
Advanced	Switcher	Display	Comm	Maintenance
	■ Event Program 1
Time Table					SETUP
	■ Event Program 2				SETUP
REC Program
	■ Event Program 3				SETUP
Event Program	■ Event Program 4
					SETUP

Special Days

Quick Menu

SETUP MENU	System	Recording	Event				LIVE
Advanced
	Switcher	Display	Comm		Maintenance
	■ Event Program 1
Time Table						SETUP
	■ Event Program 2					SETUP
REC Program
	■ Event Program 3					SETUP
Event Program	■ Event Action 4					SETUP
	Event Program 1
Special Days	■ VMD			SETUP
	■ Video Loss			SETUP
	■ Terminal/Command Alarm			SETUP
			O K	CANCEL

Quick Menu

120