Panasonic WJ-HD316A, WJ-HD309A operating instructions 133, NW Setup 1 Basic network settings

8Data Bit

Select a data length for communication from the following. 7/8 bit

8Parity

Select a method to check a transmission error at communi- cation from the following.

NONE: No parity check

EVEN: Even parity

ODD: Odd parity

8Stop Bit

Select a stop bit from the following. 1/2 bit

8Retry Timing

Select a retransmission interval for when data reception is not confirmed from the following.

OFF/100 ms/200 ms/400 ms/1 000 ms

●[NW Setup 1] Basic network settings

Perform the following basic network settings to operate this unit using a PC via a network such as a LAN.

SETUP MENU	System	Recording	Event	Schedule		LIVE
Advanced
	Switcher	Display	Comm	Maintenance
	■ HTTP Port Number
Camera Control					00080
	■ User Authentication
PS.DATA Setup					OFF
	■ Host Authentication
					OFF
RS485 Setup	■ Line Speed
					AUTO
RS232C Setup	■ Live Video Quality				FQB

NW Setup 1

NW Setup 2

NTP Setup

Quick Menu

8HTTP Port Number

Specify the HTTP port number to be used to transfer images from this unit. It is not necessary to change it for normal use.

8User Authentication

Select ON and OFF whether or not to activate user authenti- cation at the time of access from a PC to this unit.

When ON is selected, the user authentication (login) win- dow will be displayed at the time of access from a PC.

The top page will be displayed if the entered user name and password are registered.

ON: Activates user authentication.

OFF: Does not function.

Important:

It is recommended to select ON for the user authentica- tion for security.

8Host Authentication

Select ON or OFF whether or not to restrict access by IP addresses at the time of access from a PC to this unit. When ON is selected, only PCs with registered IP address can access this unit

ON: Activates host authentication.

OFF: Does not function.

Note: When ON is selected for both the user authentication and the host authentication, it is possible to operate the unit only from a registered host. Operable functions will differ depending on the user level setting of the authen- ticated user. It is impossible to operate the unit from an unregistered host.

8Line Speed

The following are available for "Line Speed". AUTO: Line speed will be applied automatically. 10-HALF:10 Mbps half duplex

10-FULL:10 Mbps full duplex

100-HALF:100 Mbps half duplex

100-FULL:100 Mbps full duplex

Note: When the SETUP MENU is closed after changing the line speed, the unit will automatically restart.

8Live Video Quality

Image quality level for a live (FQB: high quality) will be dis- played.

It is impossible to change the value for this setting.

●[NW Setup 2] Network connection settings

Perform the following network connection settings to oper- ate this unit using a PC via a network such as a LAN.

SETUP MENU
	System		Recording	Event	Schedule					LIVE
Advanced
	Switcher		Display	Comm	Maintenance
	■ DHCP
Camera Control						OFF
PS.DATA Setup	■ IP Address					192	.	168	.	000	.	250
	■ Subnet Mask					255	.	255	.	255	.	000
RS485 Setup
	■ Gateway					192	.	168	.	000	.	001
RS232C Setup	■ DNS					MANUAL
	Primary					000	.	000	.	000	.	000
NW Setup 1
	Secondary					000	.	000	.	000	.	000
NW Setup 2	■ DDNS					OFF
NTP Setup	User Name
	User Password
	Access Interval					10m
	■ Host Name
		HD316
	■ Domain Name
Quick Menu
		localdomain

8DHCP

Select ON or OFF whether or not to use the DHCP server. When obtaining IP addresses, net mask and a gateway address from the DHCP server, set to ON.

If not, set to OFF and enter those addresses manually. ON: Uses the DHCP server.

OFF: Does not use the DHCP server.

8IP Address

Enter an IP address when OFF is selected for "DHCP".

For this unit, enter 4 units from the decimal numbers (0- 254).

133