ADCTDN2412N_P_EN.book Page 15 Friday, September 28, 2007 12:49 PM
K[AC24V,DC12V] Power input terminal
To connect to AC 24 V or DC 12 V power supply. (A Pg. 21)
L[AUX,GND] External terminals
This terminal is for the input/output signals that are set in the AUX MODE of the AUX FUNCTION screen. (A Pg. 36)
●This terminal also outputs the B&W/Color signal.
●When switching B&W/Color using the control signal, the signals are input through this terminal. [B&W: MAKE, Color: BREAK]
M[VIDEO OUT] Video signal output connector
This connector outputs a composite video signal. Connect this to the video input connector of a video monitor, switcher and the like.
N[SELECTOR/SET] Selector switch/Set button
This allows user to select menu screens and change or confirm settings. (A Pg. 32)
Press the SELECTOR switch up (J) and hold for 1 second to set to [FOCUS ADJUST MODE] and open the lens iris for easy focusing.
(As the depth of object field is lower, focus can be adjusted accurately.) (A Pg. 26)
O[MENU] Menu button
When pressed, a menu screen is brought up. (A Pg. 32)
P[INT,LL] Selector Switch for Synchronizing System
This switch sets the synchronizing system for the camera.
INT | : This is set for internal synchronization (INT). |
LL (Line Lock) | : This is set to synchronize the camera’s vertical |
| synchronization to the power frequency. |
| (Default setting: INT) |
15
