American Dynamics ADCTDN2412P manual Setting is complete and the screen returns to the main menu

ADCTDN2412N_P_EN.book Page 53 Friday, September 28, 2007 12:49 PM

Set the B&W/COLOR item to AUTO

1.Select the item B&W/COLOR on the TITLE/VIDEO screen and press the SET button.

2.

3.

The B&W/COLOR screen is displayed.

Press the SELECTOR switch up or down (J, K) and select MODE. Press the SELECTOR switch left or right (H, I) and set to AUTO.

TITLE/VIDEO

CAMERA TITLE EDIT..

W. BALANCE AWC

SHUTTER..

GAIN..

EB&W/COLOR..

BLC MODE OFF

<MENU>RETURN <SET>SUB MENU

TITLE/VIDEO screen

	B&W/COLOR
E MODE		COLOR
AUTO	LEVEL	- - -
AUTO	TIME	- - -

B&W/COLOR
E MODE	AUTO
AUTO LEVEL	NORMAL
AUTO TIME	30s

<MENU>RETURN

B&W/COLOR screen

<MENU>RETURN

4.Press the MENU button twice.

The setting is complete and the screen returns to the main menu.

Memo:

●When near-infrared illumination is used, a B&W screen may switch to a color screen if the object reflects light excessively. To perform switching with higher accuracy, we recommend that you use the settings mentioned in AControl by B&W/Color switching signal from externalB (A Pg. 54).

●In the case of B&W/Color mode, the lens performance may cause the image to be out of focus when the illumination of the object is near-infrared light. In this case, use a lens that is compatible with near-infrared light.

53