American Dynamics ADCTDN2412N manual Name of Parts and their Functions, Front/Bottom/Side panel

ADCTDN2412N_P_EN.book Page 12 Friday, September 28, 2007 12:49 PM

Introduction

Name of Parts and their Functions

Front/Bottom/Side panel

AJ

I

B

			H
C
D		IRIS	G
E	DC
	VIDEO	F
		LEVEL
A Back focus adjustment ring

This ring switches between back focus adjustment and lens mounting method. When adjustment is required, loosen the back focus locking screw J by turning it anti-clockwise. After the adjustment, tighten the locking screw by turning it clockwise. This camera is factory-adjusted to a suitable position with CS-mount lens. (A Pg. 26)

BLens Mount

To attach the lens. This is suitable for CS-mount lens (1/3 size) or C-mount lens (1/3 size).

(A Pg. 18)

CCamera-mounting bracket fixing screws (x2: M2.6 x 6 mm)

Be sure to use a 6 mm long screw.

Note:

●Do not use a screw that is longer than the specified length. It may damage the internal parts.

12