Whirlpool 2194182 warranty Removing the drop-in door trim dispenser area, Adjusting the cantilever

Removing the drop-in door trim (dispenser area)

(on some models)

Remove the trim above the dispenser area for easier cleaning.

To remove the trim piece:

1.Remove all items from the shelf.

2.Pull straight up on the trim piece at each end.

To replace the trim piece:

1.Locate each end of the trim piece above the trim pocket opening.

2.Push the trim piece straight down until it stops.

3.Replace items on the shelf.

Adjusting the cantilever

Adjust the shelves to match the way you use your refrigerator. Glass shelves are strong enough to hold bottles, milk, and other heavy food items.

To remove a shelf:

1.Remove items from shelf.

2.Tilt shelf up at front.

3.Lift shelf at back.

4.Pull shelf straight out.

To replace a shelf:

1.Guide the rear shelf hooks into the slots in the shelf supports on the back liner wall.

2.Tilt front of shelf up until hooks drop into slots.

3.Lower front of shelf to a level position.

refrigerator shelves

NOTE: Glass shelves are heavy. Handle them carefully.

9