Before Using Your
Refrigerator
It is important to prepare your refrigerator for use. This section tells you how to clean it, connect it to a power source, install it, and level it.
Cleaning your refrigerator
Removing packaging materials
Remove tape and any inside labels (except the model and serial number label) before using the refrigerator.
To remove any remaining tape or label glue:
l Rub briskly with thumb.
OR
l Apply liquid
NOTE: Do not remove any permanent instruction labels inside your refrigerator. Do not remove the Tech Sheet fastened under the refrigerator at the front.
Cleaning it before use
After removing all packaging materials, clean your refrigerator before using it, if necessary. See cleaning instructions on page 23.
Leveling it
Your refrigeratorhas 2 front leveling screws
-one on the right and one on the left. To adjust one or both of these, follow the directions below.
1.Remove base grille. (See page 20.)
2.To raise front, turn screw clockwise.
3.To lower front, turn screw counter- clockwise.
4.Check with level.
5.Replace base grille. (See page 20.)
5