ADCTDN2412N_P_EN.book Page 22 Friday, September 28, 2007 12:49 PM
Setup
Connecting the back panel (continued)
Connecting alarm input/output terminal
Alarm input terminal
Connect infrared sensor, door sensor, metal sensor or sensor of manual switch and the like.
●To prevent noise from entering the internal circuit, supply
●Do not supply voltage.
●Can be set via menu whether to set to alarm when the contact is short (MAKE), or when the contact is open (BREAK). (A Pg. 37)
●Supply such that the alarm signal continues for more than 200 ms. The recognition of alarm signal may not be guaranteed if less than 200 ms.
IN | Z |
GND |
|
CLASS 2 ONLY |
|
| SEE INSTRUCTION | |
ISOLATED POWER ONLY |
| |||
|
|
| MANUAL | |
|
|
|
| POWER |
+ | - | DC12V d | INT | LL |
1 | 2 | AC24V H |
|
|
MENU
| SET |
VIDEO OUT | Z Please use a shielded cable. |
| SELECTOR |
Alarm output terminal
Connect to alarm devices such as alarm, indicator, light or buzzer.
●
●Maximum voltage 25 V, current 30 mA.
AUX
22
GND
22
