ADCTDN2412N_P_EN.book Page 36 Friday, September 28, 2007 12:49 PM
Setting
AUX FUNCTION screen
Item |
| Functions and settings |
|
| |
AUX MODE | This item sets the signal input or output of the AUX | |
|
| terminal. |
| B&W OUT : A signal is output when the camera switches | |
|
| to B&W or Color mode. |
| IR IN | : Depending on the input signal of the AUX |
|
| terminal, the camera can switch between |
|
| B&W and Color mode. When there is an |
|
| alarm input, the mode will be B&W. |
| T When the INPUT POLARITY item of the AUX | |
| FUNCTION is AMAKEB | |
| When the contact is short (MAKE), the mode is B&W. | |
| When the contact is open (BREAK), the mode is | |
| Color. |
|
| T When the INPUT POLARITY item of the AUX | |
| FUNCTION is ABREAKB. | |
| When the contact is open (BREAK), the mode is | |
| B&W. |
|
| When the contact is short (MAKE), the mode is Color. | |
| [Default setting: B&W OUT] | |
|
|
|
36
