Sharp LL-H1813 Adjusting the screen display When using an analog signal, How to Adjust

Adjusting the screen display (When using an analog signal)

Automatic screen adjustment

Options in the ADJUSTMENT Menu can be adjusted automatically (CLOCK, PHASE, H-POS, V-POS).

Note:

-When setting up this monitor for the first time or after having changed an aspect of the current system, perform an automatic screen adjustment before use.

On Screen Display for the automatic adjust- ment

First display an image that makes the entire screen light.

If you are using Windows, you can use the Adjust- ment Pattern on the accompanying CD-ROM.

Opening the Adjustment Pattern (for Windows) This explanation is for Windows 95/98/2000/Me/XP, and assumes that the CD-ROM drive is "D drive".

1.Place the CD-ROM (provided) into the computer’s D drive.

2.Open [My Computer] and select CD-ROM. If using Windows 3.1, open [File Manager] and choose D drive.

3.Double click on [Adj_uty.exe] to run the Adjustment Program. The Adjustment Pattern will appear.

Adjustment pattern

After completing the adjustments, press the computer’s [Esc] key to exit the Adjustment Program.

Note:

-If your computer’s display mode is set to 65K colors, you may see the different color levels in each color pattern or the gray scale may look colored. (This is due to the specification of the input signal and is not a malfunction.)

How to Adjust

1.Press the MENU button.

The ADJUSTMENT Menu will be displayed.

ADJUSTMENT

MANUALAUTO

CLOCK	127
PHASE	6
H-POS	149
V-POS	41
INPUT-1	ANALOG
1280 x 1024 V : 60Hz		H : 64kHz

2.Press the button.

The screen will become dark and [ADJUSTING] will be displayed. After a few seconds the ADJUSTMENT Menu will return. (The automatic adjustment is now complete.)

3.Press the MENU button 4 times to make the OSD Menu disappear.

Notes:

-In most cases automatic adjustment is sufficient.

-If necessary due to any of the following, manual adjustments (p. 18) can be performed after the automatic adjustment.

-When further fine adjustment is needed.

-When the computer’s video input signals are Composite Sync or Sync On Green. (Automatic adjustments may not be possible.)

-When [OUT OF ADJUST] is displayed. (When the screen displays an entirely dark image, the automatic screen adjustment may be disabled. When making an automatic adjustment, be sure to either use the Adjustment Pattern or try displaying an image that makes the entire screen very bright.)

English

17