Connecting the monitor and turning the monitor on and off
Turning the power on
1.Turn on the main power of the monitor.
Main power switch
Changing between input terminals
Use the INPUT button to switch between signal input terminals.
Input terminal 1 | Input terminal 2 |
INPUT | ||||
< | > |
| < | > |
|
|
|
|
|
The input signal type (ANALOG/DIGITAL) is displayed within angle brackets < >.
English
Turning the power off
-When switching the main power switch on and off, always wait for an interval of at least 5 seconds. Rapid switching may result in malfunction.
2.Press the monitor's POWER button. The power LED will light up orange.
3.Turn on the computer.
| Turn on the |
Press power button | computer |
| ON |
When a signal is input from the computer, the power LED lights up green, and the screen is displayed (After power is turned on, it may take a little time until the screen is displayed.)
-If the input terminal to which the computer is connected has not been selected, the screen will not be displayed. If necessary, perform input terminal switching.
Notes: (when using an analog signal)
-If using the monitor for the first time or after having changed the system settings during use, perform an automatic screen adjustment (p. 17).
-When connecting to a notebook, if the notebook computer's screen is set so that it is displaying at the same time, the
1.Turn the computer off.
2.Press the monitor's POWER button. The Power LED will disappear.
Turn the computer | Press power button |
off |
OFF
If the monitor will not be used for a long time, turn off the main power switch of the monitor, and remove the power plug from the outlet.
15
