Adjusting the screen display (When using an analog signal)

GAIN CONTROL Menu

GAIN CONTROL

 

 

 

 

 

 

MANUAL

 

 

AUTO

BLACK LEVEL

51

 

CONTRAST

65

 

INPUT-1 ANALOG

 

1280 x 1024

V : 60Hz

H : 64kHz

COLOR CONTROL Menu

 

COLOR CONTROL

 

 

 

 

sRGB

 

VIVID

 

COLOR MODE

STD

 

WHITE BALANCE

 

 

 

HUE

0

 

 

 

SATURATION

0

 

 

 

INPUT-1 ANALOG

 

 

 

1280 x 1024

V : 60Hz

H : 64kHz

English

MANUAL: Individual menu options are manually adjusted.

AUTO: Every menu option is automatically adjusted using the Auto Gain Control* function.

Notes:

-Press the button to select [AUTO].

-To choose a menu option: SELECT button

-To go to the next menu: MENU button

* Auto Gain Control function

-The Auto Gain Control adjusts contrast and black level based on the brightest color of the image displayed. Unless an Adjustment Pattern is used, automatic adjustment may not be possible. In such a case, either use an Adjustment Pattern, or adjust manually.

-If the signal coming from the computer is composite sync or sync on green, automatic adjustment cannot be performed. Please perform manual adjustment instead.

BLACK LEVEL

Total screen brightness can be adjusted while

watching the color pattern. ( buttons)

Color pattern

CONTRAST

While watching the color pattern, adjustments can be made so that all graduations appear.

( buttons)

Notes:

-To choose a menu option: SELECT button

-To go to the next menu: MENU button

COLOR MODE

Color tone can be set as below.

sRGB : sRGB is international standard of color representation specified by IEC (International Electrotechnical Commis- sion). Color conversion is made in taking account of liquid crystal’s characteristics and represents color tone close to it original image.

STD : Displays image with the color tone results from original scheme of liquid crystal panel.

VIVID : Displays an image with dynamic and VIVID primary colors.

-If [sRGB] or [VIVID] has been selected, items subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR MODE] is [STD].

WHITE BALANCE

After selecting [WHITE BALANCE], press the button and display the adjustment menu.

WHITE BALANCE

COOL STD WARM USER

R-CONTRAST

G-CONTRAST

B-CONTRAST

OK < MENU >

Notes:

-On settings other than [STD] not all graduations can be displayed. To display all graduations, set to [STD].

-Use the buttons to select [COOL], [·], [STD], [·], [WARM] or [USER].

-Selecting USER will display the setting values for [R-CONTRAST], [G-CONTRAST] and [B- CONTRAST], in order to make fine adjustments.

-Use the SELECT button to select [R-CONTRAST], [G-CONTRAST] and [B-CONTRAST].

-When adjustment complete: MENU button

19

Page 19
Image 19
Sharp LL-H1813 operation manual Gain Control Menu, Color Control Menu, Auto Gain Control function