Installing
Depending on the computer or OS, it may be necessary to use the computer to operate the installation of monitor
About the ICC profile
An ICC (International Color Consortium) profile is a file that describes the color characteristics of the LCD monitor. By using an application that works together with an ICC profile, a high color resolution can be realized.
-Windows98/2000/Me/XP all use the ICC profile.
-When installing Windows98/2000/Me/XP set- up information (described below), the ICC profile is also installed. If you would like to install the ICC program only, please refer to Installing the ICC profile on page 29.
-When using an ICC profile, set [COLOR MODE] and [WHITE BALANCE] to [STD], and set [HUE] and [SATURATION] to [0].
Installing set-up information
For Windows95
Installing monitor
This explanation assumes that the
1.Load the accessory
2.Click on the [Start] button. From [Settings], choose [Control Panel].
3.Double click on [Display].
4.Click on [Settings], [Advanced Properties], and [Monitor], then [Change].
5.Click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:] then click [OK].
6.Confirm that the monitor details are selected, and click [OK].
7.Check that the monitor details are displayed, then click [Apply].
8.Click [OK], and close the window.
For Windows98
Installing monitor
This explanation assumes that the
If the "Add new Hardware Wizard" has appeared:
1.Load the accessory
2.Click [Next].
3.Check [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].
4.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].
5.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish]. If the "Add New Hardware Wizard" appears, repeat the installation commands beginning from 2 above.
If the "Add New Hardware Wizard" has not ap- peared:
1.Load the accessory
2.Click on the [Start] button. From [Settings], choose [Control Panel].
3.Double click on [Display].
4.Click on [Settings], [Advanced] and [Monitor].
5.In [Options], check [Automatically detect Plug & Play monitors] and click on [Change].
6.Click [Next].
7.Click on [Display a list of all the drivers in a specific location, so you can select the driver you want.], then click [Next].
8.When [Models] is displayed, click on [Have disk], confirm that [Copy manufacturer's files from:] is [D:], and click [OK].
9.Confirm that the monitor details are selected, then click [Next], [Next], and [Finish].
10.Check that the monitor details are displayed, then click [Apply].
11.Click [OK], and close the window.
English
27
