WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the vacuum cleaner. Failure to do so could result in electrical shock or personal injury from vacuum cleaner suddenly starting.
Removing and Installing Lower Plate
| Locking | |
Latch | Tab | |
Loquet de | ||
Taquets | ||
sûreté | ||
Broche | ||
Guía de | ||
| ||
| cierre | |
Locking |
| |
Tab |
| |
Loquet de sûreté | Fig. 1 | |
Guía de cierre |
| Fig. 2 |
Lower Plate | Tabs |
Plaque inférieure | Languettes |
Base inferior | Lengüetas |
Latch | Locking | |
Tab | ||
Taquets | ||
Loquet de | ||
Broche | ||
sûreté | ||
| ||
| Guía de | |
| cierre | |
Locking |
| |
Tab | Fig. 3 | |
Loquet de sûreté | ||
Guía de cierre | ||
|
➢Before servicing any parts, disconnect vacuum cleaner from electrical outlet.
➢Always place paper under nozzle whenever lower plate is removed to protect floor.
➢Place body in upright position and turn vacuum cleaner over to expose lower plate.
➢Release lower plate by pressing two
(2) latches and two (2) locking tabs inward as shown. (Fig. 1)
➢Remove lower plate and remove any residue that may exist in belt area.
➢Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing. (Fig. 2)
➢Rotate lower plate until locking tabs snap into place then push the two (2) latches outward. (Fig. 3)
- 28 -
