Replacing Belt
Belt |
|
Courroie |
|
Correa |
|
| Agitator |
End Cap | Agitateur |
Bouchon | Agitador |
Tapa del extremo |
|
Lower Plate | Tabs |
Plaque inférieure | Languettes |
Base inferior | Lengüetas |
➢Clean agitator and reinstall the two
(2) end caps.
➢Reinstall agitator back into nozzle housing grooves.
➢After reinstalling the agitator, turn it by hand to make sure that belt is not twisted or pinched and that all rotating parts turn freely.
➢Reinstall lower plate. Ensure tabs are locked into slots.
Cleaning Agitator
➢ Clean agitator after every five uses and every time the belt is replaced.
➢ Remove lower plate.
➢ Cut off any carpet pile and lint entangled around agitator with a pair of scissors.
➢ Remove agitator.
➢ Remove any string or debris located on the end caps, washers or agitator shaft.
➢ Reinstall agitator and lower plate.
- 32 -
