Panasonic PT-AE4000E Projecting an image, Selecting the input signal, Positioning the image

Projecting an image

Selecting the input signal

111 Switch on the connected devices.

Press the play button of the required device.

222 Press the INPUT SELECT button to select the required input method if needed. See “Switching the input signal” of the functional instructions that is in the provided CD-ROM.

The image will be projected on the screen.

NOTE:

•• AUTO SEARCH is ON as default and the signal from the connected devices is detected automatically. See “AUTO SEARCH” in “OPTION menu” of the functional instructions that is in the provided CD-ROM.

Basic Operation

Positioning the image

111 Adjust the projected image with the lens shift dials. See “Lens shift and positioning” on page 15.

222 Adjust the angle of the projector.

You can screw the front leg adjusters up/down to control the angle of the projector for adjusting the throwing angle.

Screw up the front leg adjusters, and an audible click will be heard as the limit.

333 Adjust the focus and the projected image size.

Press +/− of the FOCUS and ZOOM buttons to adjust.

Press the LENS button to adjust the focus and zoom by the remote control. See “LENS CONTROL” of the functional instructions that is in the provided CD- ROM.

NOTE:

•• Do not touch the air exhaust port as this may cause burns or injury.

•• If keystone distortion occurs, see “KEYSTONE” in “POSITION menu” of the functional instructions that is in the provided CD-ROM.

•• If you adjust the focus, you may need to adjust the size of the image by pressing the ZOOM button again.

18 - ENGLISH