CD OPERATION (CONTINUED)
NOTES ON PROGRAM PLAYBACK
•You can review the program by pressing the PROG. button repeatedly while in the Stop mode.
•To add a track to the program memory, simply press the PROG. button repeatedly until the track (directory if using an MP3) appears and “00” blinks in the display, then continue as per the steps 2 and 3 on the previous page.
•Press the STOP (■) /POWER OFF button to stop the program before it is finished (the program memory will be kept).
•Each file may be stored in the program memory as many times as desired (up to 24 files).
•You can scroll through the program while it is playing using the Skip/TUNING DN o or UP n button.
ESP (ELECTRONIC SKIP PROTECTION)
This feature protects against loss of sound caused by vibrations and shocks. Continuous playback is ensured once some of the music has been stored into memory.
ESP will automatically be activated when listening to standard or MP3 CDs. You cannot deactivate ESP while listening to an MP3 CD. However, you can deactivate it when playing a standard CD by simply pressing the MENU/ESP/BAND button; the ESP indicator will disappear from the display. Deactivating the ESP will conserve battery life.
RESUME
This unit has Auto resume, which will resume playback of the previous track when the unit is turned on (and the same CD is still in the CD compartment). The RESUME button will allow you to resume playback of a CD that was previously stopped. If you stopped a CD in the middle of playing, simply press the RESUME button and the CD will continue at the beginning of the previously stopped track.
BACKLIGHT
When you turn on the unit, the backlight will light for 10 seconds. Also, when the unit is on, press any buttons (except Volume, DBBS and CD Door OPEN button) and the backlight will light for 10 seconds. If using an AC adapter, the backlight will always be lit when the unit is on.
15
