Memorex MPH2089 STOP CALL:, TO CHANGE THE REMOTE CODE (REMOTELY), TO CHANGE THE REMOTE CODE (FROM THE UNIT)

17
REMOTE OPERATION (CONTINUED)
STOP CALL:
Press the “#” pad to stop the remote function.
After the OGM is played, and the beep
is heard, enter your remote code
within 10 seconds.
1
Press the “*” pad, followed by the “3”
pad to change the remote code.
2
TO CHANGE THE REMOTE CODE (REMOTELY)
Press and hold the ON/OFF button for
2 seconds; the display will show “se”
and the remote number.
1
Press the SKIP➛➛/MEMO button❶
and/or SKIP❿❿/OGM button❷ to
select the new remote code number.
Press the ON/OFF button ❸ again to
confirm.
3
12
2
TO CHANGE THE REMOTE CODE (FROM THE UNIT)
MPH2089 O/M.QXD 9/4/01 10:30 AM Page 17