Color profile: Disabled Composite Default screen
!
DO NOT use an outlet controlled by a wall switch.
2)Flip the handset retainer over so the tab is facing up.
3)Slide the handset retainer back onto the base.
!
Before you plug the other end of the telephone cord into the modular jack on the wall, charge the battery (refer to “Charging the Battery Pack,” page 18).
12
▼Standard Wall Plate Mounting
This phone can be mounted on any standard AT&T or GTE wall plate.
1) Plug the AC adapter into the DC input jack on the back of the base, then place the AC adapter cord inside the left molded channel cord holder.
2) Plug a short telephone cord into the TEL LINE jack on the base, then place the telephone cord inside the right molded channel cord holder.
C:...MPH6928 VA OM.vp Mon Feb 14 15:27:28 2000
