Color profile: Disabled Composite Default screen
HINT
Use the < and > keys to toggle between the names and the numbers displayed in memory.
NOTE
If you select Go Back at any time, no changes are made and the handset shows the Memory Store screen.
24
7) | Press SELECT. The following screen |
|
Store Number | ||
| appears, and a cursor flashes indicating | 3055551212 |
| that the display is ready for the number |
|
| to be edited. |
|
|
| |
8) | Enter the phone number with the number keypad. | |
9) | Press SELECT. The handset beeps and |
|
| ||
| displays a confirmation screen. For | Memory 1 Stored |
| example, if you store a name and number |
|
| into memory location number one, then |
|
|
| |
| the handset shows Memory 1 Stored. |
|
10)The display then returns to the Memory Store screen. You may select another number to edit (return to step 3) or you may press MEM to return to standby.
ERASING A NUMBER FROM MEMORY
Use these steps to erase a programmed number from memory. Once a number is erased, that memory location may be programmed with a new number.
1) Remove the handset from the base.
2) Press and hold MEM for two seconds. The handset shows the Memory Store screen with any saved numbers displayed.
3)Use the : and ; keys or number keypad to select the memory location you would like to delete. The < and > keys toggle between the names display and the numbers display.
4) Press SELECT. The following screen appears with the memory location number that you have selected in the display.
5) Use the ; key to move the > cursor down to the Delete Memory command.
C:...MPH6928 VA OM.vp Mon Feb 14 15:27:41 2000
