PCM DOWN SAMPLING |
| DYNAMIC COMPRESSION | ||
|
| General | Digital Output |
|
|
| Video | PCMDown Sampling |
|
| 1 | Audio | DynamicCompression |
|
| Language | Speaker | 1 | |
| Parental |
| ||
|
|
|
| |
|
| 2 |
| 2 |
|
| Select the digital audio output conrector |
| |
Use this option to turn the PCM down sampling On or Off. Use this option to turn the Dynamic Compression On or Off. | ||||
Some amplifiers cannot support the high sampling rate of the | Dynamic compression means reducing the gap between the | |||
PCM signal. In this case, turn this option ON and the player | loudest and softest sounds. This means you can listen at lower | |||
will output at 48kHz. |
| levels. | ||
Select the Audio menu as shown on the previous page. Select | Select the Audio menu as shown on the previous page. | |||
PCM DOWN SAMPLING using the Navigation (π,†) buttons | Select Dynamic Range using the Navigation (π,†) buttons | |||
1, then press the Navigation (®) button 1; “ON” and “OFF’ | 1, then press the Navigation (®) button 1; “ON” and “OFF’ | |||
will appear. Select ON to turn on this option or OFF to turn off | will appear. Select ON to turn on this option or OFF to turn off | |||
this option using the Navigation (π,†) buttons 1, then press | this option using the Navigation (π,†) buttons 1, then press | |||
the ENTER button 2. |
| the ENTER button 2. | ||
NOTE: | Even when PCM down sampling is set to OFF, some | NOTE: This option is effective only when the soundtrack is | ||
discs will show output down sampled audio through the | encoded as Dolby Digital. | |||
coaxial and optical digital outputs. |
|
| ||
SPEAKER |
| Use this option to turn on a speaker and to set the speaker | ||
|
|
|
| |
|
|
|
| distances from the user. |
|
|
|
| Select the Audio menu as shown on the previous page. Select |
|
|
|
| Speaker using the Navigation (π,†) buttons 1, then press |
|
|
|
| the Navigation (®) button 1; the Digital Output options will |
|
|
|
| appear. Select one of the speakers ({C} Center, {L/R} |
|
| 1 |
| Left/Right, {SL/SR} Surround Left/Surround Right, {LFE} |
|
|
|
| Lower Frequency Effect) using the Navigation (π,†) |
|
| 2 |
| buttons 1, then press the ENTER button 2 to select. Press |
|
|
|
| ENTER button again to disable this function or use |
|
|
| 3 | Navigation (π,†) buttons 1 to highlight different speaker |
|
|
|
| setting option. Adjust the distance from the desired seating |
|
|
|
| area using the Navigation (√,®) buttons 1. When done, |
|
|
|
| press the RETURN button 3. |
NOTES: |
|
| ||
• | Press the SETUP button to exit the Setup menus. |
| ||
• Press the RETURN button to return to the previous setting.
20
