Memorex MVDP1101 Basic Operation, Mute Button, Mode Button, Headphone Jacks, Screen Menu Button

BASIC OPERATION

IMPORTANT:

When “ ” appears while pressing a button, this means that the

corresponding function cannot be performed either on the disc inserted, or

in the selected mode.

MUTE BUTTON	P/N BUTTON
1	1

Press the MUTE button once to mute the	Press the P/N button to switch back and
sound; “MUTE” will appear on the screen. forth between NTSC and PAL. In the USA,
Press the MUTE button again to restore the	the standard is NTSC.
sound; “MUTE OFF” will appear temporarily
on the screen.	MODE BUTTON
HEADPHONE JACK(S)
1	1

For private listening, plug headphones into		Press to cycle between standard 4:3 size
one or both of the Headphone jacks. The		(TV) and full screen (will fill the LCD
speakers will be disconnected when		screen).
headphone(s) are connected.		NOTE: The MODE button is just for
		adjusting the built-in screen’s display only,
SCREEN MENU BUTTON		not for the Video Output.
		Press the SCREEN MENU button 1 to access the on-
1
		screen picture display menu. Repeatedly press the
		SCREEN MENU button 1 to cycle through Brightness
1	2	and Color, then use the + 2 and – 3 buttons to adjust.
		When finished, press the SCREEN MENU button 1
		repeatedly until the on-screen picture display menu
		disappears to exit. NOTE: If the SCREEN MENU, + or
		– button is not pressed, after 20 seconds, the on-screen
		25 picture display menu will disappear from the screen.