![](/images/new-backgrounds/1305533/30553355x1.webp)
DVD OPERATION
IMPORTANT NOTES:
• After plugging in, the unit will be in the Power Off mode. Press the Power button on the main unit to turn on the unit. You can also press the POWER button on the remote to turn on the unit.
• “ ” will appear on the screen during operation if you try to access a function that is not available on the disc.
• Some discs may take a few seconds to load.
• If a disc is inserted incorrectly, dirty, damaged, or is not present at all, “NO DISC” will appear in the display.
• Always hold the disc without touching either of its surfaces. When inserting a disc, position it with the printed title side facing up, align it with the guides and place it in its proper position.
• It is important that you read the manual that accompanies the DVD disc as there are features that are on this DVD player that cannot be used with certain DVDs. There are also extra features that are different for each DVD disc, so they are not explained in this owner’s manual.
• If the unit is in the Stop mode, Pause mode or if there is no disc in the disc tray, the screen saver will appear on the screen after 3.5 minutes. After the screen saver appears on screen for 3.5 minutes, the unit will turn off automatically.
PLAYBACK OF A DVD
12
Press the POWER button on the remote | Press the OPEN button to open the |
to turn on the unit. | disc tray, “OPEN” will appear on the screen. |
NOTE: | Insert a disc with the label side facing up on |
You can also press the POWER button on | the disc tray. |
the main unit to turn on the unit. |
|
CONTINUED ON THE NEXT PAGE
27