Memorex MVT2195B, MVT2135B Symptoms Cause Possible Solutions, Recording, Playback, Remote Control

SYMPTOMS	CAUSE	POSSIBLE SOLUTIONS	PAGE
TV shuts off.	TV station stopped broadcasting.	Tune new channel.	18
	Sleep timer is set.	Set Sleep Timer to "0".	20
	TV station experiencing problems or	Try another channel.	18, 20
	program tuned is not closed captions.
Closed caption is not		Check CATV connection of VHF/
	TV signal is weak.	UHF antenna, reposition or rotate	11, 13
activated.
		antenna.
	The TV/CAP/TEXT button is not	Press the TV/CAP/TEXT button to	20, 21
	depressed.	turn on the closed caption.
RECORDING
TV recording does not work.	The video cassette's erase prevention	Place a piece of vinyl tape over the	34
	tab is broken off.	hole.
	The time is not set correctly.	Reset the present time.	17
Timer recording does not	The recording start/end time is not set	Reset the start/end time.	42, 43
	correctly.
work.
	The TIMER REC button has not been	Press the TIMER REC button (the	43
	pressed (the T-Rec indicator is not lit.).	T-Rec indicator is lit.).
PLAYBACK
	Tape is old or worn.	Replace the tape.	—
Noise bars appear on the	Tracking adjustment is beyond range	Adjust tracking manually using the
		SET/TRACKING +/– buttons on	36
screen.	of automatic tracking circuit.
		the remote control.
	Video heads are dirty.	Clean the video heads.	52
REMOTE CONTROL

ENGLISH

Remote control does not operate.

The remote control is not aimed at the	Aim the remote control at the	10
sensor.	remote sensor.
Distance is too far or too much light in	Operate within 15 feet or reduce	10
the room.	the light of the room.
There is an obstacle in the path of the	Clear the path of the beam.	10
beam.
The batteries are weak.	Replace the batteries.	10
The batteries are not inserted correctly.	Insert correctly.	10

FOR ADDITIONAL SET-UP INFORMATION OR CUSTOMER SERVICE

PLEASE CALL:

1-800-919-3647

51

545A201A-E/P40-53 51 17*04*0, 19*29