Memorex MVT2199, MVT2197 owner manual Picture Control Adjustments

CONTRAST 32

〈 +/–/ENTER/CANCEL/MENU〉

〈 +/–/ENTER/CANCEL/MENU〉

〈 +/–/ENTER/CANCEL/MENU〉

PICTURE CONTROL ADJUSTMENTS

Picture controls are factory preset but you can adjust

COLOR

them individually as follows:

1 To display the picture adjustment

screen, press the MENU button.

Press the SET/TRACKING + or –

button to select the TV SET-UP

option, then press the ENTER

button.

M E N U

TIMER REC SET

TV SET-UP

CH SET-UP

AUTO REPEAT ON OFF SYSTEM SET-UP

〈+/–/ENTER/MENU〉

Press the ENTER button until “COLOR” appears on the screen, then press the SET/TRACKING + or

–button to adjust the color intensity of the picture. The control should be set when colors appear normal in intensity and brilliance.

COLOR 0

〈+/–/ENTER/CANCEL/MENU〉

2 Press the SET/TRACKING + or –

button to select the PICTURE

option, then press the ENTER

button.

TV SET-UP ON/OFF TIMER

PICTURE

〈+/–/ENTER/MENU〉

TINT

Press the ENTER button until “TINT” appears on the screen, then press the SET/TRACKING + or – button to

adjust the tint of the picture. This TINT0 determines how accurately the

BRIGHTNESS

Press the ENTER button until “BRIGHTNESS” appears on the screen, then press the SET/

TRACKING + or – button to adjust BRIGHTNESS 0 the brightness of the picture. When

the SET/TRACKING + button is pressed, the darker portions of the picture become lighter.

CONTRAST

Press the ENTER button until “CONTRAST” appears on the screen, then press the SET/TRACKING + or

– button to adjust the contrast of the picture. Pictures look sharpest in the daytime (bright light) by increasing

the contrast. At night (dim light), the sharpest picture is obtained by reducing the contrast.

NOTE: The CONTRAST default setting is set to maximum at the factory.

colors are reproduced by the TV.

Adjusting the tint for natural facial tone is the best method of obtaining accurate color reproduction of the entire picture.

SHARPNESS

Press the ENTER button until

“SHARPNESS” appears on the
screen, then press the SET/
TRACKING + or – button to adjust	SHARPNESS 0
the sharpness of the picture.	〈 +/–/ENTER/CANCEL/MENU〉

CANCEL

Pressing the CANCEL button while making picture adjustments will return all adjustments to the factory preset levels.

NOTE: The On-screen display will disappear 6 seconds after finishing an adjustment or by pressing the MENU button three times. The settings can only be adjusted when they are displayed on the TV screen.

18

5A42201A E P12-19 18 17/4/2002, 13:32