MX3905.O/M.QXD 2/20/03 7:06 AM Page 16
OPERATING INSTRUCTIONS (CONTINUED)
SETTING THE TIMER
Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows : NOTE: Please make sure the volume is set to the desired level to wake you up.
1 |
2 |
1 |
With the power off, press the TIMER button ❶; “TIMER” will blink in the display. Press and hold the MEM/ CLOCK button ❷ until the Timer Hour blinks in the display.
2 |
|
2 | 1 |
| 3 |
Press the CD Skip/Search 
❶ or 
❷ button to set the hour, then press the MEMORY/ CLOCK SET button ❸ again; the minute digits will blink. Press the CD Skip/Search 
❶ or 
❷ button to set the minutes, then press the MEM/CLOCK button ❸ again.
3 |
Within a few seconds, “TIMER” will light in the display to indicate that the timer is set. When the actual time matches the time set for the Timer, the unit will turn on to the last function (CD or tuner) used. It will play for one hour (in the Tuner mode) or to the end of the disc (in the CD mode) and then shut off and reset itself for the following day.
TO TURN THE TIMER OFF SO IT IS NOT SET FOR THE NEXT DAY, press and hold the TIMER button again until “TIMER” disappears from the display.
SNOOZE
The timer can be temporarily turned off manually by pressing the SNOOZE button; the timer will turn back on automatically nine minutes later.
ACTIVATING THE SLEEP FUNCTION
Set the sleep timer as follows:
1 |
Press the POWER button to turn the unit on and tune the desired radio station or insert a CD as previously instructed.
2 |
Press the SLEEP button and “90” will appear and “SLEEP” will blink in the display.
3 |
Press the SLEEP button a second time to set the unit to turn off after 80 minutes. Each additional press with decrease the sleep time by 10 minutes. After the sleep time is set, the SLEEP Indicator will light in the display after five seconds, then you can press the SLEEP button at any time to stop the Sleep function; “SLEEP” will disappear from the display.
16
