SLEEP TIMER OPERATION
Unlike other timer functions, the SLEEP timer is used to set the length of time until air conditioner operate is stopped.
To Use the SLEEP Timer
While the air conditioner is operating or stopped, press the SLEEP button (Fig. 6 J).
The indoor unit’s OPERATION Indicator Lamp (red) (Fig. 3 5) and the TIMER Indicator Lamp (green) (Fig. 3 6) will light.
To Change the Timer Setting
To Cancel the Timer:
Use the TIMER button to select “TIMER RE- SET”.
The air conditioner will return to normal op- eration.
To Stop the Air Conditioner During Timer Operation:
Press the START/STOP button.
Press the SLEEP button (Fig. 6 J) once again and set the time using the SET TIME buttons (Fig. 6 L).
Set the time while the Timer Mode Display is flashing (the flashing will continue for about five seconds).
button: Press to advance the time. 
button: Press to reverse the time.
About five seconds later, the entire display will reappear.
About the SLEEP Timer
To prevent excessive warming or cooling during sleep, the SLEEP timer function automatically modifies the thermostat setting in accordance with the time setting. When the set time has elapsed, the air conditioner completely stops.
During Cooling/Dry operation: | SLEEP timer setting |
|
When the SLEEP timer is set, the thermostat setting is auto- matically raised 2 °F every sixty minutes. When the thermo-
Set time
stat has been raised a total of 4 °F, the thermostat setting at that time is maintained until the set time has elapsed, at which time the air conditioner automatically turns off.
1 hour
2 °F
4 °F
