Memorex MX4137 manual Repeat Playback Of One Track Or All Tracks, Programmed Playback

REPEAT PLAYBACK OF ONE TRACK OR ALL TRACKS

4		2
3	1	1
2
To repeat a single track, while in		To repeat all of the tracks on a		To cancel Repeat Playback,
the Stop mode, press the		disc continuously, while in the		press the REPEAT/MEM-UP
REPEAT/MEM-UP button ❶ once;		Stop mode, press	the	button until “REP” disappears
“REP” will blink in the display.		REPEAT/MEM-UP button	❶	from the display.
Press the Tune/Skip/Search	o 2	twice; “REP” will light solid in the
or n 3 button to select the		display. Press the PLAY/PAUSE
specific track that you wish to		(®p) button ❷ to begin all tracks
repeat. When the desired track		repeating.
number appears in the display,
press the PLAY/PAUSE (®p)
button ❹ to begin playback. The
specific track you selected will be
repeated continuously.

PROGRAMMED PLAYBACK

The CD player in this unit has a 20 track programmable memory that allows you to program up to 20 tracks on any disc for playback in any desired order. You may program 20 different tracks or you may also program certain tracks to play more than once.

To perform programmed playback, proceed as follows:

Press the CD Function button;	Press the CD OPEN button and	Press the MEM/CLOCK ADJ
“CD” appears in the display.	gently press a CD onto the center	button; “P-01” (program number)
NOTE: You can also repeatedly	spindle with the label side facing	and “01” (track number) will
press the FUNCTION button on	forward and close the CD	appear and “MEM” will blink in the
the remote to select CD.	compartment.	display.
	NOTE: 3 inch single or standard
	CDs can be used with this unit.

PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.

14