SETTING THE TIMER

Set the timer to turn the unit on to the Tuner, CD or LINE IN mode at a preset time as follows:

1

 

1

3

 

3

 

2

 

2

 

TO SET THE TIMER ON TIME,

Within 5 seconds (when the

Press the MEM/CLOCK ADJ button 1

to confirm; the minute digits will blink,

with the unit off (in Standby

TIMER indicator is blinking in the

press the Tune/Skip/ Search o 2 or n

mode), press the TIMER/SLEEP

display), press and hold the

3 button to set the timer's On Minute.

button (on the main unit) or the

MEM/CLOCK ADJ button 1 until

When finished, press the MEM/CLOCK

TIMER button (on the remote),

the hour digit is blinking then

ADJ button 1 to confirm. After approx.

"TIMER" will blink in the display.

release. Press the Tune/Skip/

five seconds, the display will show the

clock again and the timer will be

 

Search o 2 or n 3 button to set

activated (“TIMER” will appear in the

 

the timer’s On Hour.

display).

 

 

When the actual time matches the

 

 

timer’s On Time, the unit will turn on to

 

 

the last function used (Tuner, CD or

NOTES:

 

LINE IN).

 

 

• To turn the TIMER OFF, press the POWER button to turn the unit off and the timer will be set for the next day.

• To activate the Timer mode, with the unit off, press the TIMER/SLEEP button (on the main unit) or TIMER button (on the remote),

"TIMER" will blink first and then remain lit in the display. To cancel, press the TIMER/SLEEP button (on the main unit) or the TIMER

button (on the remote) until "TIMER" disappear from the display.

 

• Before setting the timer, make sure there is a disc inside the CD compartment when waking to a CD, make sure a AM/FM station is tuned

when waking to the radio or make sure there is audio signal for the LINE IN when waking to LINE IN. Also, make sure the volume level is

adjusted to a suitable level before turning off the unit. Otherwise, there will not be sound when the timer’s On Time is reached.

ACTIVATING THE SLEEP FUNCTION

 

Set the sleep timer as follows:

 

 

With the unit on and in the CD, RADIO (AM/FM) or LINE IN mode, press the TIMER/SLEEP button and “90” will appear and “SLEEP” will blink in the display.

Within 5 seconds, press the TIMER/SLEEP button a second time to set the unit to turn off after 80 minutes. Each additional press with decrease the sleep time by 10 minutes. Press the TIMER/SLEEP button repeatedly until “SLEEP” disappears from the display to deactivate the Sleep feature.

16

Page 17
Image 17
Memorex MX4137 manual Setting the Timer, Activating the Sleep Function, To SET the Timer on Time