Memorex MX5510 manual Time OFF Setting, Sleep Timer

TIMER SETTING

2.Press the MEMO / C-ADJ button one time and hour digit will flash. Then press the TUNING • DOWN / PREVIOUS or TUNING • UP / NEXT button until the correct hour digit appears.

3.Press the MEMO / C-ADJ button again and minute digit will flash. Then press the TUNING • DOWN / PREVI- OUS or TUNING • UP / NEXT button until the correct minute digit appears.

TIME OFF SETTING

1.Press the MODE / REMAIN button until the Time OFF appears.

2.Press the MEMO / C-ADJ button one time and hour

digit will flash. Then press the TUNING • DOWN / PREVIOUS or TUNING • UP / NEXT button until the correct hour digit appears.

NOTE: Make sure TIMER appears in the top left corner. If TIMER dose not appear on LCD display, press TIMER button on remote control and follow steps above to set.To cancel TIMER ON/OFF setting, press TIMER button on remote control again until the TIMER disappears from LCD display.

3.Press the MEMO / C-ADJ button again and minute digit will flash. Then press the TUNING • DOWN / PREVI- OUS or TUNING • UP / NEXT button until the correct minute digit appears.

4.Press the TIMER button until the appears, then press the POWER button to turn the system to STANDBY mode.

NOTE: Make sure the is displayed. The system will automatically turn on/off itself when set time arrives.

SLEEP TIMER

Your system can automatically turn itself off after 10 to 90 minutes. Choose the period that you wish system to stay on, and when the “SLEEP” time arrives, the system will turn itself off automatically.

1.Turn the system on and press SLEEP button. The “SLEEP” indicator will illuminate.

2.Press the SLEEP button continuously to set the sleep time from 90 to 10.

16