CD CHANGER
•Total remaining time of current disc
1
2 5
3 4
•Total playing time of current disc.
2 | 1 |
5 | |
3 | 4 |
CD PROGRAM ( CD MEMORY )
Storing a Program
1.In CD stop mode, press the MEMO /
2.The track number, program number and “MEMORY” indicators will flash.
2 | 1 |
5 | |
3 | 4 |
3.Select the disc number by pressing the DISC SKIP button, and press the TUNING • UP / NEXT or TUNING
• DOWN / PREVIOUS button until the desired track number that you wish to program appears on the dis- play.
4.Press the MEMO /
NOTE: You can also select and store the track number directly with the number keys
5.Select another track number and store the track into the CD program by following step 3 to step 4.
6.Up to 40 CD tracks can be programmed. When 40 tracks have been stored, the ² FULL ² indicator will illuminate.
Checking a Program
1.In CD PLAYBACK mode, press the TUNING • DOWN / PREVIOUS or TUNING • UP / NEXT button to check the CD program which you stored.
2.Each time the TUNING • DOWN / PREVIOUS or TUN- ING • UP / NEXT button is pressed, the CD program number appears together with the corresponding disc and track number.
Playing a Program
1.Press the PLAY / PAUSE button to start the CD pro- gram from the first track you stored.
2.Also you can press the TUNING • DOWN /PREVIOUS or TUNING • UP / NEXT button to select a particular track to play from the CD program.
3.Programmed tracks will remain stored in the memory (even when the system is switched off) until they are erased.
Erasing a Program
In CD stop mode, press the STOP / MEMO • DOWN button to erase the CD program. The MEMORY indica- tor goes out and the program is erased.
NOTE: When the CD program has been done, you can only play the memory tracks. Unless you erase the CD program, the CD normal playing cannot be resumed .
20
