TAPE PLAYER
RECORDING [ DECK A ]
NOTE: To set up a CD program before recording, see page 17.
5.To stop recording , press the STOP / EJECT button on [ DECK A ] ,and at this time , the CD playback will be in the Pause mode. If you press the RECORD and PLAY buttons on [ DECK A ] again, the CD playback will continue playing automatically.
6.To stop or pause CD playback, press STOP button or PLAY / PAUSE button of CD controls.
Recording from TUNER to TAPE
1.Insert a blank tape into [ DECK A ].
2.Select the TUNER function by pressing the TUNER / BAND button on the front panel or remote control.
3.Press the TUNER / BAND button repeatedly until the desired band (FM or AM) is selected.
4.Press the TUNING • UP / NEXT or TUNING • DOWN / PREVIOUS button to select the desired frequency.
5.Press the RECORD and PLAY button on [ DECK A ] to start
6.To stop or pause recording, press the STOP/EJ or PAUSE button on [ DECK A ].
NOTE: The HSD (high speed dubbing) function does not operate during
SEQUENTIAL PLAYBACK [ DECK B ] TO [ DECK A ]
NOTE: The sequential play feature automatically plays [ DECK A ] after [ DECK B ] has played and shut off.
1.Insert a tape into [ DECK A ] and [ DECK B ].
2.Press the PLAY button on [ DECK B ] to begin play- back.
3.Press the PAUSE button on [ DECK A ].
4.Press the PLAY button on [ DECK A ]. When the tape in [ DECK B ] reaches the end. The PAUSE button on [ DECK A ] will release automatically and playback will begin.
22
