![](/images/new-backgrounds/1017752/177525x1.webp)
LOCATION OF CONTROLS
1. | Speakers | 16. | Minute Set Button |
2. | Function Switch | 17. | Repeat Button |
3. | Power Switch | 18. | Play/Pause Button |
4. | Stereo Headphones Jack | 19. | FM Stereo Indicator |
5. | Volume Control Knob | 20. | Stop Button |
6. | Skip / Backward Search Button | 21. | CD Door |
7. | Remote Sensor | 22. | Tuning Knob |
8. | Skip / Forward Search Button | 23. | CD Door Open Button |
9. | Power Indicator | 24. | CD Door Close |
10. | Program Button | 25. | Band Switch |
11. | ON / OFF Alarm Switch | 26. | AC Socket |
12. | Display | 27. | Left Speaker Jack |
| (CD, Time, AM/FM Station, Alarm) |
|
|
13. | Alarm Set Button | 28. | Right Speaker Jack |
14. | Time Set Button | 29. | FM Wire Antenna |
15.Hour Set Button
- 3 -
CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the corresponding input (R) for the right speaker and input (L) for the left speaker, located at the back of the unit.
Warning:
zConnect the loudspeakers before powering the unit:
zThe unit may not work properly or get damaged if you use speakers different than the ones supplied with the unit
AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1.Do not plug or unplug the power cable while you have wet hands;
2.When planning not to use this unit for a long time, disconnect the power cable from the wall outlet;
3.When disconnecting the power cord from the wall outlet, do not pull on the cord in order to avoid shock risks caused by damaged cable.
SET THE CORRECT TIME
Before starting to set the time, make sure that the Function Switch is not on Radio position.
Press and hold the time button as well as the Hour and Minute buttons simultaneously, in order to set the time. Release all buttons when reaching the correct time.
RADIO OPERATION
1.Set the Function Selector to Radio position;
2.Set the band selector to AM/FM position;
3.Adjust the TUNING control to tune in a radio station.
SET THE ALARM TIME
Before starting to set the alarm time, make sure that the Function Switch is not on Radio position.
Press and hold simultaneously the Alarm button as well as the Hour and Minute buttons, to adjust the alarm time. Release all buttons when reaching the desired alarm time and the display will go back to regular time.
- 4 -