RADIO WAKE UP FUNCTION
Select the desired radio station and set the volume to the desired level and make the following steps:
1.Slide the Function Switch to auto position;
2.Press the ALARM ON/OFF button once to activate the alarm function and the display will show "((((( • "indicating that the alarm is ON and press the ALARM ON/OFF button again to cancel;
3.Set the alarm time as indicated at the SET ALARM TIME section and the unit’s radio will turn on at the
BUZZER WAKE UP FUNCTION
Follow the same instructions as for Radio Wake up Function, but slide the Function Switch to Alarm position. The buzzer will sound for 3 minutes.
CD PLAYER OPERATION
To play a CD, please follow the steps underneath:
1.Set the Function Selector to the CD position;
2.Press the OPEN button in order to open the CD door;
3.Insert the CD with the printed side facing up and close the CD door;
4.Disc information (total number of tracks) will appear on the LED display;
5.Press PLAY/PAUSE button to start playing the CD;
6.Adjust the volume control to the desired volume level;
7.Press STOP, to stop playing the CD
SKIP DURING PLAY MODE
1. | Press SKIP | button once to skip to the beginning of the next track; |
2. | Press SKIP | button once to skip to the beginning of the correct |
| track; |
|
3. | Press SKIP | twice quickly in succession to go back to previous |
| tracks. |
|
SEARCH DURING PLAY MODE
1.Press and hold the search buttons to quickly advance or reverse through the music at high speed;
2. Release the SEARCH button to return to normal play mode.
- 5 -
PROGRAMMING THE CD PLAYER
The programming of the CD player should be done during STOP mode.
1.Press the PROGRAM button to begin programming the CD player;
2. Press SKIP or SKIP buttons, to select desired track;
3.Press PROGRAM button again to store this track in memory;
4.Repeat steps from 2 to 3 to store more tracks in memory. You can store a maximum of 19 tracks in the memory.
5.Press PLAY/PAUSE button to play the disc in the programmed order;
6.To stop playing, press STOP;
7.To cancel the programming, press STOP button and open the CD player door or select a different function (OFF/RADIO etc.)
REPEAT FUNCTION
To repeat the same track:
-Press REPEAT button before or while playing the song. The REPEAT
symbol "
" will light up on the display. To repeat the whole disc:
-Press REPEAT button twice. The REPEAT symbol "
" will light up on
the display.
To cancel the repeat function:
-Press REPEAT button three times. The REPEAT indicator will be cleared from the display.
PAUSE FUNCTION
1.While playing a CD, press PLAY/PAUSE button once to temporarily pause the play.
2.Press PLAY/PAUSE button again to resume play.
REMOTE CONTROL OPERATION
Open the Battery Compartment Door and insert two pieces "AAA" size batteries into the battery compartment with battery polarity as shown inside the battery compartment.
Point the remote control at the remote sensor. The functions of the buttons on the remote control are same as the corresponding controls on the main unit.
- 6 -
