
USER GUIDE
VERSION 1.0
Optical ScrollPro Mouse SE
DEAR CUSTOMER:
Congratulations on your decision to purchase the Memorex Optical ScrollPro Mouse SE! Please take time to read the following instructions carefully. They will help you get full use out of your mouse and keep it working reliably for many years.
Your Memorex Optical ScrollPro Mouse SE is a USB device that also includes a
GETTING STARTED
Before connecting the optical mouse to your computer, check to be sure your computer has a free USB port (either USB 1.1 or 2.0) or a PS/2 mouse port. The USB port will be a rectangular socket with a USB logo next to it; the PS/2 mouse ports are circular sockets and are most often colored a light green. Please note that USB is only supported properly by Windows 98SE/Me/2000/XP. If your operating system is Windows 95, 98 or NT, you will have to attach the
CONNECTING TO THE USB PORT
You do not need to turn your computer off before connecting the mouse. Insert the plug at the end of the mouse cable into the USB port without applying force. If the plug does not slide into the port easily, turn the cable end over and try inserting it again. The plug should slide in easily; please note that it fits only one way. The mouse will work at this point, but to activate the scroll wheel and the programmable buttons, the supplied software must be installed. To install the software, follow SOFTWARE INSTALLATION below.