Mercedes-Benz 6515 6786 13 Switching the Comand control unit on and off Switching on, Volume

At a glance

Quick reference COMAND

Quick reference COMAND

i

You have the following options to control the system:

at the COMAND

at the multifunction steering wheel (refer to vehicle Operator’s Manual)

using the Voice control system* (refer to separate operating instructions for further information)

This Operator’s Manual describes the control at the COMAND.

Unless otherwise indicated, the descriptions and illustrations refer to the COMAND.

Switching the COMAND control unit on and off

Switching on

Turn the key in the steering column lock to position 1 or 2.

or

Press e.

In both cases, the system will activate the operating mode which was active when the system was switched off.

i

If the key is not in the steering lock in position 1 or 2, the system will automatically stop after around 30 minutes. A warning is displayed prior to the system switching off.

Switching off

Turn the key in the steering column lock to position 0 and pull the key out.

or

Press e.

Volume

The volume is adjusted jointly for the telephone*, the navigation system and the Voice control system.

The volume setting applies to other operating modes as well: Radio, CD, CD changer, MP3-CD and DVD.

When you adjust the volume, the system will automatically store the setting for the current operating mode. The volume for the navigation announcements can only be changed while an announcement is being made.

34