OPERATION
! |
WARNING
Using an outboard that exceeds the maximum horsepower limit of a boat can: 1) cause loss of boat control 2) place too much weight at the transom altering the designed flotation characteristics of the boat or 3) cause the boat to break apart particularly around the transom area. Overpowering a boat can result in serious injury, death or boat damage.
Pre‑Operating Check List
•Check the inflation pressure of the air chambers.
•Remove any obstruction from the drain valve.
•Check the outboard for tightness on the transom.
•Know the fuel capacity and cruising range.
•Check that the lanyard stop switch for the outboard works correctly.
•Be sure the boat is not overloaded. Do not exceed the maximum number of passengers or load capacity. Look at the boat capacity plate.
•Be sure there is an approved personal flotation device of suitable size for each person aboard and readily accessible (it is the law).
•Check that the paddles are in the boat in case of engine trouble.
•Be sure the operator knows safe navigation, boating, and operating procedures.
•Be sure there is a ring type life buoy or buoyant cushion designed to be thrown to a person in the water.
•Arrange the passengers and load in the boat so the weight is distributed evenly and everyone is seated in a proper seat or on the floor.
•Instruct at least one passenger in the basics of boat handling and the starting and operation of the outboard, in case the driver becomes disabled or falls overboard.
•Before departing, tell someone where you are going and when you expect to return.
24
