Configuring the digital surround processor using a computer
99
When the download is complete the 568 will automatically reset
itself to use the new settings, and show the owner name you
defined:
For example:
Zachary Ford
To calibrate the loudspeakers
Now proceed through the calibration procedure to set the
correct relative level, delay, and phase for each of the
loudspeakers in the system. See Calibrating the system,
page 67.
To fetch the calibrated settings
Finally fetch the calibrated settings back from the digital
surround processor as follows:
●Make sure your settings file is loaded into the Meridian
Configuration program.
●Click the Fetch button in the toolbar.
The Progress dialogue box will show you the progress as the
settings are fetched:
You can verify that the calibrations you made are now included
in the settings by checking the Distances and Phase/Gain
pages of the Speakers settings option.