•Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the unit and its cabling.
•Ensure that the receiver uses
•Relocate the receiver with respect to the unit.
•Connect the receiver and this product to different AC outlets.
•If the problem persists contact your dealer.
Drive units move when the C51 is switched on or off
This is normal as the amplifier electronics settle.
The sound from one or more speakers is either muffled (lacking in HF) or thin (lacking in bass)
Check that the crossover cards have been correctly inserted, and in particular that the
type of crossover card in each bay matches the type of loudspeaker connected to the corresponding output channel. Each crossover card includes indicator lights that show
the presence of power and, by their colour combination, indicate the type of speaker for which the card is designed. Confirm that these are indicating correctly.
Unit stays in standby
This generally indicates a problem with the trigger connection and/or setup:
•Check the trigger cabling and that it is correctly wired.
•Ensure that the source device providing the trigger is configured to provide a voltage in the range
Meridian Audio Limited
Latham Road,
Huntingdon, Cambridgeshire PE29 6YE
United Kingdom
Tel +44 (0) 1480 445678
Fax +44 (0) 1480 445686
Web:
Meridian is registered trademark of Meridian Audio Ltd
Other trademarks are the property of their respective owners.
Meridian America Inc
8055 Troon Circle, Suite C
Austell, Atlanta GA
USA
Tel +1 (404) 344 7111
Fax +1 (404) 346 7111
Email:
C51man v1.0 • REƒ • 20070727
