EN | DSP3300 User Guide |
Unpacking
The DSP3300 is supplied with the following accessories:
•Power cord.
•This manual.
If either of these items are missing please contact your dealer.
NOTE: You should retain the packaging in case you need to transport the units.
Connections
The following diagram gives details of the connections on the base of the speaker:
Fuse |
|
|
|
|
| Fuse |
|
|
|
|
| ||
Power |
|
|
|
|
| Inlet |
|
|
| ||||
|
|
| ||||
|
|
|
|
| Power | |
|
|
|
|
| ||
|
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
|
|
|
RL/C | Digital Channel Selector | Channel selector | |
|
|
| |
|
|
| |
|
|
|
|
Input Output | SpeakerLink | SpeakerLink output |
SpeakerLink input |
Standby indicator
The status of the DSP3300 is shown by a green standby indicator on the back panel.
StatusDescription
Dimly illuminated | Speaker in standby |
Brightly illuminated | Speaker operating |
Digital connections
Use this connection | To connect to this |
SpeakerLink input | The SpeakerLink output of a Meridian |
| Sooloos component, Digital Surround |
| Controller, or Audio Core 200, or the |
| SpeakerLink output of another DSP |
| loudspeaker. |
SpeakerLink output | The SpeakerLink input of a second |
| DSP3300 digital speaker, when daisy- |
| chaining the speakers. |
Miscellaneous
Switch | Description |
Digital Channel Selector | Set to L/C to use the speaker as a left |
| or centre channel speaker. Set to R |
| to use the speaker as a right channel |
| speaker. |
The speakers are switched on or into standby as appropriate via the SpeakerLink connections by the Meridian system they are connected to.
