Avaya Inc. Desktop Charger, Dual Charger, and Quad Charger User Guide
Overview
Your WT is a state of the art communication device that utilizes
radio wave technology to send and receive voice transmissions. It
is designed to operate like the familiar cell phone. However, the
WT utilizes the private telephone system installed in your facility
and will not operate outside the area reached by this system.
Additionally, the features that are available depend on how the
WT has been programmed by your system administrator.
The following guide is meant to provide general information
about your WT. Contact your system administrator for additional
information on how your WT functions within your telephone
system.

Status Indicators

1 The line indicators are associated with line access keys. In the
preceding diagram, line 1 is active.
A left or right arrow is displayed when the screen can be toggled
either left or right to display more characters as described above.
Up and down arrows are displayed when the menu has additional
options above or below what is shown in the display area.
The battery icon indicates the amount of charge remaining in the
Battery Pack. The level indications are approximations of the
remaining Battery Pack life. They do not indicate equal amounts
of Battery Pack Life. When only one level remains, the Battery
Pack needs to be charged.
The Voicemail icon is activated when a new voice mail message
is received if the feature is supported by the phone emulation. It
appears to the right of the Signal Strength icon.
Battery Low This message displays and an alarm sounds when the WT is in
standby mode and the Battery Pack is critically low. The WT
cannot be used until the Battery Pack is charged.
[No Service message] If warning tones are not disabled, an alarm will sound and a
descriptive message displays when the handset cannot receive or
place calls. You may be outside of the covered area. Walk back
into the covered area. The in-service tone indicates service is re-
established.
The signal strength icon indicates the strength of the signal and
can assist the user in determining if the WT is moving out of
range.
The download icon indicates that the WT is downloading code.
This icon only appears while the WT is running the over-the-air
downloader. It appears to the right of the Signal Strength icon in
the same location as the Voicemail icon.
[Melody] A melody is played after the WT is powered on for the first time
following a completed charge (Charge Complete).
21-300632, Issue 1, July 2005 Page 8