Power on/off
Turning on the power
1. Make sure that the POWER indicator turns in steady orange and the lens cover is removed.
2. Press the STANDBY/ON button on the projector or the remote control.
The projection lamp will light up and the POWER indicator will begin blinking in green. When the power is completely on, the indicator will stop blinking and light in steady green.
To display the picture, select an input signal according to the section “Selecting an input signal” (15).
Power on/off
STANDBY/ON button POWER indicator
INPUT/LAMP 
STANDBY/ON ENTER
MENU TEMP 
POWER 
| COMPUTER/ |
| |
VIDEO | STORAGE | SEARCH |
|
ASPECT |
| AUTO | BLANK |
MAGNIFY | HOME | PAGE UP | VOLUME |
ON | |||
OFF | END | PAGE DOWN | MUTE |
FREEZE | MY BUTTON | KEYSTONE | |
| 1 | 2 |
|
POSITION |
|
| MENU |
| ENTER |
| |
ESC |
|
| RESET |
Lens cover
Turning off the power
1. Press the STANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds.
2. Press the STANDBY/ON button again while the message appears.
The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete.
3. Attach the lens cover, after the POWER indicator turns in steady orange.
Do not turn the projector on for about 10 minutes after turning it off. Turning the projector on again too soon could shorten the lifetime of some consumable parts of the projector.
WARNING ►A strong light is emitted when the projector’s power is on. Do not look into the lens of the projector or look inside of the projector through any of the projector’s openings.
►Do not touch around the lamp cover and the exhaust vents during use or just after use, since it is too hot.
►Remove the power cord for complete separation.
NOTE • Please power on the projector prior to the connected devices. Power off the projector, after all of connected devices are powered off.
•This projector has the function that can make the projector automatically turn on/off. Please refer to the AUTO ON (37) and AUTO OFF (38) items of the OPTION menu.
•Use the shutdown switch (63) only when the projector is not turned off by normal procedure.
13
