INPUT Menu
INPUT Menu (continued)
Item | Description |
Set the video format for the
(1) Use the ◄/► buttons to select the input port.
| (2) Using the ▲/▼ buttons switches the mode | 58+&'1 | 8+&'1 |
|
|
| |
| for video format. |
| #761 |
|
| 065% | |
| AUTO ó NTSC ó PAL ó SECAM |
| 2#. |
|
| 5'%#/ | |
VIDEO FORMAT |
| 065% | |
| /2#. | ||
| • This item is performed only for a video signal |
| 02#. |
|
|
| |
| from the VIDEO port or the |
|
|
•The AUTO mode automatically selects the optimum mode.
•The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an irregular picture, lack of color), please select the mode according to the input signal.
| Using the ▲/▼ buttons turns the frame lock function on/off. | |
| TURN ON ó TURN OFF | |
| • This item can be performed only on a computer signal with a | |
FRAME LOCK | vertical frequency of 50 to 60 Hz. | |
• When the TURN ON is selected, a moving pictures are displayed | ||
| ||
| more smoothly. | |
| • This function may cause a certain degradation of the picture. In | |
| such a case, please select the TURN OFF. | |
| Set the computer input signal type for the ports of COMPUTER. | |
| (1) Use the ◄/► buttons to select a COMPUTER port to be set. | |
| COMPUTER IN1 ó COMPUTER IN2 | |
| (2) Use the ▲/▼ buttons to select the computer input signal type. |
AUTO ó SYNC ON G OFF
COMPUTER IN Sync on Green signal can be supported, if AUTO is selected.
•When the AUTO is selected, the picture may be distorted with certain input signals. In such a case, remove the signal connector first and select SYNC ON G OFF on the menu, and then reconnect the signal.
•Component signal can be supported through COMPUTER IN1 port, if AUTO is selected for the COMPUTER IN1 port.
(continued on next page)
29
