
OPTION Menu
OPTION Menu
From the OPTION menu, items shown in the table below can be performed.
Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item, except for the items LAMP TIME and FILTER TIME. Then perform it according to the following table.
/'07=%1/276'4? | 5'.'%6 | ||
2+%674' | #7615'#4%*674010 | ||
+/#)' | |||
+0276 | #76110674010 | ||
5'672 | #7611((OKP | ||
.#/26+/'J | |||
5%4''0 | |||
(+.6'46+/'J | |||
126+10 | |||
/;$76610 |
| ||
'#5;/'07 |
| ||
5'48+%' |
| ||
|
| ||
| 5'%74+6; |
| |
| 75$5614#)' |
Item
Description
| Using the ▲/▼ buttons turns on/off the automatic signal search function. |
| TURN ON TURN OFF |
| When the TURN ON is selected, detecting no signal automatically cycles |
| through input ports in the following order. The search is started from the |
AUTO SEARCH | current port. Then when an input is found, the projector will stop searching |
| and display the image. |
| COMUPUTER IN1 COMPUTER IN2 |
| VIDEO |
|
|
| Using the ▲/▼ buttons turns on/off the automatic keystone function. |
| TURN ON TURN OFF |
| TURN ON : Automatic keystone distortion correction will be |
| executed whenever changing the slant of the projector. |
AUTO | TURN OFF : This function is disabled. Please execute the AUTO |
KEYSTONE | KEYSTONE EXECUTE in the SETUP Menu for automatic |
| keystone distortion correction. |
| • When the projector is suspended from the ceiling this feature will |
| not function properly so select the TURN OFF. |
| • This function will be unavailable when the Transition Detector is |
| on (46). |
| Using the ▲/▼ buttons turns on/off the AUTO ON function. |
| TURN ON TURN OFF |
| When set to the TURN ON, the lamp in projector will be automatically |
| turned on without the usual procedure (13), only when the projector is |
AUTO ON | supplied with the power after the power was cut while the lamp was on. |
| • This function does not work as long as the power has been supplied to |
| the projector while the lamp is off. |
| • After turning the lamp on by the AUTO ON function, if neither input nor |
| operation is detected for about 30 minutes, the projector is turned off, even |
| though the AUTO OFF function (38) is disabled. |
(continued on next page)
37